SAP NetWeaver 2004s Java Trial Version

Installation steps:

• Known Problems
• Installation of SAP Web Application Server Java 7.00 and content
• Installation of SAP NetWeaver Developer Studio
• Installation of MaxDB Database Manager and SQL Studio
• Getting started
• Installing a credential for Adobe Document Services

Known problems

• Installation fails if MaxDB 7.5 is installed already on the system. Completely remove the MaxDB software beforehand.
• J2SDK 1.4.2_10 is not supported.
• To be able to choose the installation drive of the SAP System, neither a sapmnt nor a saploc file share must exist on the target host. Also no SAP system must be installed already.

Installation of SAP Web Application Server Java 7.00 and content

To install the system, you must be logged on to your PC with administrator privileges.

Depending on the resources of your computer, the installation may take up to 4 hours. Do not interrupt the procedure. We strongly recommend to use the values provided in this installation guide. Before installing SAP Web Application Server and SAP NetWeaver Developer Studio, close all applications.

1. Check first the system requirements.
2. If necessary, install the SUN J2SE SDK version 1.4.2_09.
3. Start setup.bat from the directoy where you unzipped this installer software to.
4. In SAPInst, use the values as followed:
   
   

   Wizard page name	Actions to be done on this page
   Welcome to SAP NetWeaver 2004S SR 1 Sneak Preview Full Edition	Choose Installation, click Next
   License Agreement	Read, and if you agree, scroll down, check the 'I have read...' checkbox, click Next
   Java System > Java Development Kit	Enter the location of your local JDK installation (e. g.: C:\j2sdk1.4.2_09)
   SAP System > General Parameters	Leave the default SAP System ID, J2E
   SAP System > General Parameters	(Optional, appears only if no sapmnt or saploc file share is set up in the system already.) Choose the drive for the engine files (Database files will be defined on a subsequent page)
   SAP System > Windows Domain	(Optional, only if no SAP system user accounts exist already in the system) Choose Local installation. You need to have Administrator privileges with your current user account.
   SAP System > Master Password	For some features to work as preconfigured, leave the default, abcd1234
   SAP System > OS User Passwords	Default is abcd1234, ie. the master password. If the password does not match you Windows password policy (eg., 10 letters, at least on digit), installation will fail.
   SAP System > Database Parameters	Leave the default, J2E
   MaxDB > Installation Drives	Choose the drives where the database parts are to be installed.
   Prerequisite Check	The installation routine will complain if the OS is not MS Windows Server 2003 Server Enterprise Edition. However, MS Windows XP Professional (andt possibly others) should work either. Press Next and then Cancel to continue.
   MaxDB > Database Users	Leave the default password, abcd1234, ie. the master password you specified
   MaxDB > Database Parameters	Leave the defaults
   MaxDB > Log Volumes	Choose the drive for the log area of the database, leave the log size (1000MB) as is
   MaxDB > Data Volumes	Define the drives for the two data areas of the database. Leave the sizes as are (1200MB).
   MaxDB > Java Database Schema Password	Leave the default, abcd1234, ie. the master password you specified
   SAP System > Secure Store Settings	Leave the default, abcd1234, ie. the master password you specified
   MaxDB > Create Database Statistics	Leave the default
   SAP System > SCS Instance	Leave the defaults
   SAP System > Central Instance	Leave the defaults
   SAP System > SDM	Leave the default, abcd1234, ie. the master password you specified
   SAP System > Unpack Archives	Leave the defaults
   Parameter Summary	A last chance to change installation parameters. Click Start to finally start the installation procedure.

   
   
5. For your convenience and to minimize system resources the server must be started manually using the SAP Management Console:
   • find shortcut for "SAP Management Console" on your desktop or in "Start" -> "All Programs"
   • open the SAP Management Console
   • in the left panel expand SAP Systems node, you will find the installed system (J2E)
   • right-click on J2E and "Start" the system
     
   This process takes about 45-100 minutes depending on your system. You might check the status by expanding the nodes. A green dot indicates a successful start. If the status turns to “stopped” you might try to right-click on J2E -> Stop, wait for all processes to be stopped and repeat the steps above.

Installation of SAP NetWeaver Developer Studio

Download the SAP NetWeaver Developer Studio from http://sdn.sap.com/irj/sdn/downloads at the same location you've downloaded this Trial Version. Start the IDE70setup.exe and follow the instructions to install the Developer Studio.

Installation of MaxDB Database Manager and SQL Studio

For database maintenance, the included MaxDB Database Manager can be used. The installation file can be found at <zip_extract_folder>\MaxDB\MAXDB_WINDOWS_I386\SETUPS. At the same location you'll find the MySQL MaxDB SQL Studio.

Getting started

Whenever you are asked for authentication use the following username and password combination

• username: Administrator
• password: <master password as specified during installation>
  

MaxDB's Database Manager Operator login values

• username: control
• password: <master password as specified during installation>
  

The MaxDB J2E database user is

• username: SAPJ2EDB
• password: <master password as specified during installation>
  

To test the installed NetWeaver 2004s Web Application Server and Enterprise Portal use following steps:

• Open an Internet Explorer and browse to http://localhost:50100/
  The main Web Application Server window appears.
• Debugging port and some other interesting info can be found at: http://localhost:50100/sap/monitoring/SystemInfo
• To log into the Enterprise Portal browse to this URL: http://localhost:50100/irj/. The Enterprise Portal login page appears.
  You can log into the system using username: admin password: admin
  Note: This username password combination applies everytime the Enterprise Portal login dialog is displayed.
• A brief test to examine whether Adobe Document Services are running can be accomplished using the URL: http://localhost:50100/AdobeDocumentServices/Config
  In order to use Adobe Document Services you need to install a valid credential.
  For more information about Adobe Document Services credential please refer to Installing a credential for Adobe Document Services below.
• In order to use CAF browse to: http://localhost:50100/caf/
  Guided Procedures Design-time can be found at: http://localhost:50100/webdynpro/dispatcher/sap.com/caf~eu~gp~ui~dt/AppWorkset
  Guided Procedures Run-time: http://localhost:50100/webdynpro/dispatcher/sap.com/caf~eu~gp~ui~rt/WorkCenterRT
  Additional information on the included Guided Procedures example Time-off Process is available at <zip_extract_folder>\NW04SneakPrevJavaSP15\DOC\Time-Off-Process.pdf
  
• Visual Composer is available at http://localhost:50100/VC . Adobe SVG Viewer must be installed on the client machine for the VC workbench to function.
• The NWDI can be accessed through http://localhost:50100/devinf. TO log in use the Administrator with respective password defined during installation phase.

The password for SDM deployment is: <master password as specified during installation>

Installing a credential for Adobe Document Services

In order to work with Adobe Document Services you need to install a valid credential. A preliminary credential is available at sdn.

To install a credential perform following steps:

• Extract the archive
• Copy the file filename.pfx to the directory <INST_DRIVE>:\usr\sap\J2E\SYS\global\AdobeDocumentServices\TrustManagerService\trust\credentials

Register the password for credential as described below:

• Log on to the Visual Administrator (<INST_DRIVE>:\usr\sap\J2E\JC00\j2ee\admin\go.bat)
• On the Cluster tab, choose Server 0 -> Services -> Document Services Configuration
• On the Runtime tab, select Credentials
• Choose Browse to search for the name of the credential and then Select
• In the Alias field, enter the alias of the credential you installed, for example ReaderRights. (Entries for the name of the credential are case-sensitive)
• In Password field, enter the password you received together with the credential you installed (filename.txt in the archive). Confirm the password again and then click Add
• Restart the following services for the changes to take effect: PDF Manipulation Module, Document Services Trust Manager. To perform this, right-click on the repective service choose Stop and after the service has stopped, Start it again
• Restart also the application com.adobe/AdobeDocumentServices located at Server 0 -> Services -> Deploy (radio button Application)

An Adobe Document Services demo application is installed at:
http://localhost:50100/webdynpro/dispatcher/local/TutWD_OnlineInteractiveForm/OnlineInteractiveFormApp

Errorhandling

• If your installation terminates before it is successfully completed, try with a restart of the installer.
• To remove an installed system, see uninstall.

Next